Our UVR/S-RFI-HS Variable Phase Angle Power Regulator is designed for single-phase 230VAC. The load current has a maximum capacity of 17A. The module gives full adjustment of the output voltage from 0 to 98% of the load (scale plate included). Fitted with an RFI filter to comply with EMC regulations.
These types of power controllers are used where simplicity of control is required. They operate on the same principle as a light dimmer by slicing the voltage wave smaller and smaller to reduce the power output. The effect of on/off control is undesirable such as with the use of infrared heat lamps and quartz heaters. They have a maximum working capacity of 17A which equates to 4000w with the correct heat sink and heat-sink paste applied.

Features • Inbuilt RFI network • Output Variable from 0 to 98%. • Load Current Upto 17A*. • ON/OFF Switch included. • Supplied with knob and scale plate. • Easy installation.

Applications • Quartz Lamps • Resistive Heating elements. • Oven Heaters. • Industrial Dryers.

Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, straight boss adaptor, quick fit push tubing. Insert the desired size rubber reducing boss to quickly connect onto 42mm or 50mm soil pipe. One end is enlarged to take the reducing rubber seals, the other end is 50mm to work with the push fit plastic ranfe. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, angled boss adaptor, quick fit push tubing. Insert the desired size rubber reducing boss to quickly connect onto 42mm or 50mm soil pipe. One end is enlarged to take the reducing rubber seals, the other end is 50mm to work with the push fit plastic range. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

FLO.250.HOSE 2.5 Meter Grey Inlet Hose Learn More

50mm Grey Pipe clip for Push Fit Tubing. These sturdy pipe clips give a 20mm stand off from the wall and feature a lever system to enable a quick install and easy removal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

4204 Contactor Learn More

4648 O-ring 7.66 x 1.78mm Learn More

6830 Holder For Rinsing Jet Learn More

6831 Rinse Jet Learn More