Hydraulic oven fan wheel puller set. This is suitable for removing the fan wheels from ovens such as Houno, Rational, Electrolux etc. For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.
Set contains: 1 x 10 ton hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. 1 x 100mm ram extension. Please note: These are not original fan wheel pullers supplied by the OEM. Learn More

Osram Halopin oven lamp to suit Mono BX oven range. This is a 230v G9 fitting bulb, 25watt. Can withstand high temperatures of 300 Degrees. Learn More

Glass Lens. Frosted Clear Glass for Lamp Housing Learn More

Our UVR/S-RFI-HS Variable Phase Angle Power Regulator is designed for single-phase 230VAC. The load current has a maximum capacity of 17A. The module gives full adjustment of the output voltage from 0 to 98% of the load (scale plate included). Fitted with an RFI filter to comply with EMC regulations.
These types of power controllers are used where simplicity of control is required. They operate on the same principle as a light dimmer by slicing the voltage wave smaller and smaller to reduce the power output. The effect of on/off control is undesirable such as with the use of infrared heat lamps and quartz heaters. They have a maximum working capacity of 17A which equates to 4000w with the correct heat sink and heat-sink paste applied.

Features • Inbuilt RFI network • Output Variable from 0 to 98%. • Load Current Upto 17A*. • ON/OFF Switch included. • Supplied with knob and scale plate. • Easy installation.

Applications • Quartz Lamps • Resistive Heating elements. • Oven Heaters. • Industrial Dryers.

Learn More

200W Jacketed Catering Quartz Infrared Heat Lamp 118mm 240v. Energy-efficient short-wave heat lamps from OTS are designed for use in heated counters and serveries by catering equipment manufacturers. Also known as an R7s lamp Learn More

300W Jacketed Catering Quartz Infrared Heat Lamp 118mm 240v. Energy-efficient short-wave heat lamps from OTS are designed for use in heated counters and serveries by catering equipment manufacturers. Also known as an R7s lamp. Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, 90 degree elbow (actually 87.5 degree), quick fit push tubing, with integrated seal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, 45 Degree Elbow, quick fit push tubing, with integrated seal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, 90 Degree Tee, quick fit push tubing, with integrated seal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More