You have no items in your shopping cart.
Accessories
-
Catering Gas Hose 1/2" 1000mm (Dormont)
Dormont unbraided Gas Hose Which includes a Quick-Disconnect Coupling and a Straight Restrainer Cable with mounting hardware.- Hose Type: Unbraided
- Length: 1000mm
- Inside dia: 1/2-inch
- System: Gas Hose Only
Regular Price: £54.79
Your Price Excl. Tax: £36.50 Incl. Tax: £43.80
You Save: £9.16 (20%)
-
Catering Gas Hose 3/4" 1000mm (Dormont)
Dormont unbraided Gas Hose Which includes a Quick-Disconnect Coupling and a Straight Restrainer Cable with mounting hardware.- Hose Type: Unbraided
- Length: 1000mm
- Inside dia: 3/4-inch
- System: Gas Hose Only
Regular Price: £78.22
Your Price Excl. Tax: £48.00 Incl. Tax: £57.60
You Save: £17.18 (26%)
-
Catering Gas Hose Straight Restrainer 36" Kit Dormont
Catering Gas Hose Straight Restrainer 36" (Dormont) Learn MoreExcl. Tax: £8.87 Incl. Tax: £10.64 -
Differential Air Pressure Switch 20-300Pa - Interlock Suitable
DPS-88 Differential Air Pressure Switch - Working range 20 - 300 Pa for air and non corrosive gases. Used in kitchens in combination with switch gear to effect an auto gas cut off in the event of a fan failure. (Gas interlock). Features • Duct Fixing Kit Included • IP54 Housing • One Screw Needed for Housing Cover • Scale in Pascal's Learn MoreExcl. Tax: £13.50 Incl. Tax: £16.20 -
Duct Fixing Kit - for Pressure Switches
A Duct Fixing Kit to be used with all air pressure switches and sensors. The kit consists of 2m (6.56 ft), 5mm (0.20") i/d plastic tubing, 2 x pilot tubes and 4 x fixing screws. Learn MoreExcl. Tax: £7.50 Incl. Tax: £9.00 -
Differential Air Pressure Switch 20-200Pa - Interlock Suitable DPSA-20
DPSA-20 Differential Air Pressure Switch - Working range 20 - 200 Pa for air and non corrosive gases. Used in kitchens in combination with switch gear to effect an auto gas cut off in the event of a fan failure. (Gas interlock). Features • Duct Fixing Kit Included • IP54 Housing • One Screw Needed for Housing Cover • Scale in Pascal's Learn MoreExcl. Tax: £13.50 Incl. Tax: £16.20 -
Hydraulic Oven Fan Wheel Puller Set Houno Rational
Hydraulic oven fan wheel puller set. This is suitable for removing the fan wheels from ovens such as Houno, Rational, Electrolux etc. For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.
Set contains: 1 x 10 ton hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. 1 x 100mm ram extension. Please note: These are not original fan wheel pullers supplied by the OEM. Learn MoreExcl. Tax: £196.00 Incl. Tax: £235.20 -
Brass 3/4" BSP Y Piece Connector (Combi Ovens)
Brass 3/4" BSP Female to twin outlet 3/4" BSP Male Y Piece adaptor. Used for splitting a single combi oven feed into 2 feeds. Used when a combi oven requires one feed to go through a water softener and another feed to use raw water. Also widely used on washing machine installations. This is the same thread that standard washing machine / water feed hoses use. Learn MoreExcl. Tax: £5.00 Incl. Tax: £6.00 -
Plastic 3/4" BSP Y Piece Connector (washing machine)
Plastic 3/4" BSP Female to twin outlet 3/4" BSP Male Y Piece adaptor. Used for splitting a single combi oven feed into 2 feeds. Used when a combi oven requires one feed to go through a water softener and another feed to use raw water. Also widely used on washing machine installations. This is the same thread that standard washing machine / water feed hoses use. Learn MoreExcl. Tax: £4.50 Incl. Tax: £5.40 -
Plastic 3/4" BSP Nipple (Hose Coupling)
Plastic 3/4" BSP to 3/4" BSP Nipple. Used for joining 2 x 3/4" Hoses together. Can be used to extend washing machine hoses or stainless braided hose installations. Learn MoreExcl. Tax: £3.00 Incl. Tax: £3.60
