DF-FX-600 FX 600 + Pre-Galv Channel 600mm 95mm high 180mm width Max Load 450Kg Learn More

50mm Plastic Push Fit Stop Cap. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

Here we have a 7 Piece Slotted / Philips Screwdriver Set with VDE 1000V Insulated C-Plus Handle. Supplied in a presentation box and comprising of the following screwdrivers: Flat Blade 3.0 x 100, 4.0 x 100, 5.5 x 125, 6.5 x 150. Philips End PH1 x 80, PH2 x 100 & VDE Approved Voltage Tester Long. Learn More

18 Piece 1/4" Drive Hexagon Socket Set - Metric comprising of 1/4" Drive reversible ratchet, 1/4" Drive Straight Handle, 1/4" Drive Knuckle Joint, 1/4" Drive 6" Extension, 1/4" Drive 2" Extension, 1/4" Drive Sliding T Bar, 1/4" Drive Sockets 4- 13mm. Learn More

20 Piece 3/8" Drive 6-Point Socket Set comprising of the following contents: 3/8" Drive reversible ratchet, 3/8" Drive 10" extension bar, 3/8 Drive 5" extension bar, 3/8" Drive knuckle joint, 3/8" Drive 16mm Spark Plug Socket, 1/2" to 3/8" Reducer, 3/8" Drive Sockets 6-17mm, 19mm, 22mm. Learn More

Hydraulic oven fan wheel puller set. This is suitable for removing the fan wheels from ovens such as Houno, Rational, Electrolux etc. For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.
Set contains: 1 x 10 ton hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. 1 x 100mm ram extension. Please note: These are not original fan wheel pullers supplied by the OEM. Learn More

The Merlin CT1250 (gas interlock) ventilation interlock system, with built in current monitoring, is designed specifically for use in commercial kitchens to meet BS6173. This panel is to be used when the kitchen appliances do have flame failure devices, therefore Gas proving is not a requirement. The Merlin CT1250 acts as an interlock between the ventilation system and the gas solenoid valve. The system has built in current monitors in order to interlock with up to 2 fans and offers an alternative to using air pressure differential switches. Learn More

Yellow Gas Emergency Remote Stop Flush Mount (Gas Shut Off), to suit gas interlock systems. 2 Wire connection. Item comes with 1 reset key in the box. Also available, spare reset keys and safety guards to prevent accidental activation. Learn More

DPS-88 Differential Air Pressure Switch - Working range 20 - 300 Pa for air and non corrosive gases. Used in kitchens in combination with switch gear to effect an auto gas cut off in the event of a fan failure. (Gas interlock). Features • Duct Fixing Kit Included • IP54 Housing • One Screw Needed for Housing Cover • Scale in Pascal's Learn More