304 Stainless steel double tundish for Combi Oven installations, welded 1 1/2" BSP thread to underside. 2 pre drilled holes for wall mounting. These compact tundish's are perfect on any installation, when you compare them to deeper tundishes, these can be placed lower to the ground giving you more flexibility on those 16 and 20 grid ovens 220mm wide x 110mm deep x 200mm high Height includes 30mm fixing plate, 120mm body and 50mm stem. Learn More

Stainless Steel Clamp to fit 50mm pipe, M8 & M10 Thread A4 SS Learn More

Plastic 3/4" BSP to 3/4" BSP Nipple. Used for joining 2 x 3/4" Hoses together. Can be used to extend washing machine hoses or stainless braided hose installations. Learn More

Plastic 3/4" BSP Female to twin outlet 3/4" BSP Male Y Piece adaptor. Used for splitting a single combi oven feed into 2 feeds. Used when a combi oven requires one feed to go through a water softener and another feed to use raw water. Also widely used on washing machine installations. This is the same thread that standard washing machine / water feed hoses use. Learn More

885.040.050 S - 1 1/2" BSP Female Screwed to 50mm Outside Diameter Push Fit Adaptor to suit Blucher Stainless Steel Push Fit Pipework. This adaptor can be used with our Tundish's which will enable you to continue the drainage in push fit stainless pipe. Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, straight coupler, quick fit push tubing, with integrated seal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, angled boss adaptor, quick fit push tubing. Insert the desired size rubber reducing boss to quickly connect onto 42mm or 50mm soil pipe. One end is enlarged to take the reducing rubber seals, the other end is 50mm to work with the push fit plastic range. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

304 Stainless steel rear exit tundish 304 Stainless steel rear exit tundish for Combi Oven installations, welded 1 1/2" BSP thread to underside. 4 pre drilled holes for wall mounting, with support bracket. Stainless tundish's are widely used on combination oven installations that require an air break on the waste system. Install it on a solid wall, connect either iron or heat resistant plastic fittings to the 1 1/2" BSP connection and join into existing drain pipework. Using either a combination oven drain kit or stainless push fit drain system, easily pipe down and over the tundish. By using the tundish installation, you allow heat to escape from the drain and it also allows the equipment owner to easily move the oven for cleaning without the worry of cracking a hard plumbed drain. 140mm wide x 150mm deep x 180mm high Height includes 2 x 30mm fixing plates, Total overall height 175mm Depth includes 50mm connector on rear. Learn More

50mm Plastic Push Fit Stop Cap. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More