DPS-88 Differential Air Pressure Switch - Working range 20 - 300 Pa for air and non corrosive gases. Used in kitchens in combination with switch gear to effect an auto gas cut off in the event of a fan failure. (Gas interlock). Features • Duct Fixing Kit Included • IP54 Housing • One Screw Needed for Housing Cover • Scale in Pascal's Learn More

A Duct Fixing Kit to be used with all air pressure switches and sensors. The kit consists of 2m (6.56 ft), 5mm (0.20") i/d plastic tubing, 2 x pilot tubes and 4 x fixing screws. Learn More

DPSA-20 Differential Air Pressure Switch - Working range 20 - 200 Pa for air and non corrosive gases. Used in kitchens in combination with switch gear to effect an auto gas cut off in the event of a fan failure. (Gas interlock). Features • Duct Fixing Kit Included • IP54 Housing • One Screw Needed for Housing Cover • Scale in Pascal's Learn More

Hydraulic oven fan wheel puller set. This is suitable for removing the fan wheels from ovens such as Houno, Rational, Electrolux etc. For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.
Set contains: 1 x 10 ton hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. 1 x 100mm ram extension. Please note: These are not original fan wheel pullers supplied by the OEM. Learn More

Brass 3/4" BSP Female to twin outlet 3/4" BSP Male Y Piece adaptor. Used for splitting a single combi oven feed into 2 feeds. Used when a combi oven requires one feed to go through a water softener and another feed to use raw water. Also widely used on washing machine installations. This is the same thread that standard washing machine / water feed hoses use. Learn More

Plastic 3/4" BSP Female to twin outlet 3/4" BSP Male Y Piece adaptor. Used for splitting a single combi oven feed into 2 feeds. Used when a combi oven requires one feed to go through a water softener and another feed to use raw water. Also widely used on washing machine installations. This is the same thread that standard washing machine / water feed hoses use. Learn More

Plastic 3/4" BSP to 3/4" BSP Nipple. Used for joining 2 x 3/4" Hoses together. Can be used to extend washing machine hoses or stainless braided hose installations. Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, 90 degree elbow (actually 87.5 degree), quick fit push tubing, with integrated seal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More

High Temperature PVC Push Fit Tubing / Pipe. 50mm diameter, 45 Degree Elbow, quick fit push tubing, with integrated seal. Quickly and easily assemble drainage works or use as drainage pipework from combi ovens. Can withstand temperatures of up to 95 degrees C.

• Pipes and fittings manufactured in a single-layer technology, with a thick-walled section, using a perfected raw material formula
• 100% recyclable pipes and fittings
• Simple and reliable hub-and-spigot joints for pipes and fittings factory fitted with lip seals
• Easy and quick installation – low weight and centimetre scale printed on pipes
• High mechanical impact strength
• Good resistance to chemicals from PH2 to PH12

Learn More